Not Just
Better Plastic.
Most pill organizers are made from petroleum-based plastic. Ours is made from corn starch. It's a fundamental difference in what ends up in contact with your pills every single day.
Switch between 7 day and 4 day in under 10 seconds. No tools needed.
1
2
3
4
5
Follow Along!
My Business Journey... All Through YouTube
Everything you need to know about the Twisting Pill Organizer. Can't find your answer? Email us directly.
The lid opens with a single quarter turn counterclockwise. Eleven N35 neodymium magnets pull it into place when you close it, creating a satisfying lock every time. Stainless steel ball plungers guide the compartments closed and prevent from opening on their own.
No. This was one of the first design problems we solved. The eleven neodymium magnets hold the lid securely closed and it takes a deliberate quarter turn to open. Bumping it against something, dropping it, or having it rattle around in a bag will not open it.
The original reason this product was designed was because every other pill organizer we tried eventually opened in a bag. The magnetic lock was the solution.
Yes. Pill organizers containing your own personal medications are permitted through TSA security. We recommend keeping your medications in their original prescription bottles inside your carry-on if you want to avoid any questions, but the organizer itself has no issues going through X-ray.
Many customers use this specifically as a travel organizer. Its slim profile fits easily in a pocket, toiletry bag, or carry-on without taking up much space.
No. Magnets do not affect the chemical composition of oral medications, vitamins, or supplements. The magnets are embedded in the lid and body of the organizer, they do not come into direct contact with your pills.
If you have a medical device like a pacemaker or implanted defibrillator, follow your doctor's guidelines regarding proximity to magnets generally. For most people, this is not a concern with everyday pill organizers.
4.75 inches tall by 2 inches in diameter. It fits in a standard jacket pocket, a gym bag side pocket and most toiletry bag compartments. The slim cylindrical profile was specifically designed so it does not take up more space than it needs to.
It is water resistant but not waterproof. The magnetic lid creates a reasonably tight seal that will handle splashes, light rain, and being thrown in a gym bag. It is not designed to be submerged in water.
If you are taking it to a beach, pool, or wet environment, keep it in a pocket or bag rather than leaving it exposed. Your pills will be fine for normal everyday use and light travel.
Every organizer is designed and hand made in the United States. Each unit is inspected individually before it ships. We do not use overseas mass production factories, each piece is made to order, which is part of why we can use better materials and update the design based on your feedback.
It is made from PLA (Polylactic Acid) a bioplastic derived entirely from corn starch, not petroleum. The FDA classifies it as Generally Recognized as Safe (GRAS) for food contact. It contains no BPA and no phthalates, not because they were removed, but because corn-starch-based plastic does not use those compounds in the first place.
Yes. BPA-Free Phthalate-Free FDA GRAS Classified
PLA bioplastic does not use BPA or phthalates in its manufacturing process. These chemicals are used in petroleum-based plastics to achieve certain properties, since PLA starts from corn starch, it does not require them at any stage of production.
PLA does not produce persistent microplastics. A 2024 meta-study by HYDRA Marine Sciences, reviewing over 500 peer-reviewed papers, found that unlike petroleum-based plastics which fragment into microplastics that accumulate permanently in the environment and in living organisms, PLA fragments continue to degrade through hydrolysis until they break down into lactic acid and ultimately CO₂ and water.
The difference: petroleum plastic microplastics are permanent. PLA fragments are transient.
You store your medications and supplements in this thing every day. Most pill organizers on the market are made from polypropylene or ABS, both petroleum-derived plastics that can contain or leach endocrine-disrupting chemicals like BPA and phthalates under certain conditions.
PLA comes from a completely different source (corn starch), has a 30-year food contact safety record, and allows us to update the formulation as new research comes out rather than being locked into a petrochemical baseline. The material story is one of the main reasons this product exists.
PLA begins to soften at around 55-60°C (131°F). For everyday use this is not an issue. Your pills, your pocket, your gym bag, and your nightstand are all well below that temperature.
The one place to be careful is inside a car on a hot day. A parked car in direct summer sun can exceed 60°C inside, which could cause warping. Do not leave it on a dashboard or in a hot car for extended periods. Keep it in your bag or bring it inside and it will be fine.
Both inserts fit inside the same bottle. The difference is how the space is divided inside.
You can switch between them in under 10 seconds. Twist the lid off, slide the insert stack out, drop in the other one, replace the lid. No tools. No fumbling.
The 7 day insert holds roughly 3 to 4 medium-sized pills (like standard Advil or vitamin D capsules) per slot. The 4 day insert holds more per slot, approximately 6 to 8 medium pills depending on their shape.
If you take more than 4 or 5 pills daily and need a full week loaded at once, the 4 day insert gives you more total volume per compartment.
Standard fish oil softgels (roughly 16-18mm oval capsules) will fit in the 4 day inserts, approximately 2 to 3 per slot. They are tight in the 7 day insert due to their width, so if fish oil or similarly large softgels are part of your daily routine, the 4 day is the better choice.
Extra large capsules (over 20mm) or unusually wide softgels may not fit comfortably in either insert.
Yes. Additional Inserts are available separately on our website. Each set includes either the 4 day and 7 day inserts so you can switch between them based on what your day needs.
Yes. The XL Bottle is currently in development. It uses the same twist mechanism but with significantly more capacity per slot, designed for people who take a larger daily supplement stack.
You can join the XL waitlist to get early access when it launches.
Orders are fulfilled and shipped within the United States in an average of 5 to 10 business days. Each organizer is made to order rather than pulled from a warehouse, so fulfillment includes print time, quality inspection, and packaging before it ships.
You will receive a tracking number via email once your order has shipped.
We currently ship to limited countries internationally, adding more countries regularly. If you are able to checkout that means we ship to your country.
We offer a 30 day hassle-free return policy and a 100% satisfaction guarantee. If you are not happy with your order for any reason, reach out to me at robert@fictionproducts.com and we will make it right. We are a small company and we care about every order.
Email us at robert@fictionproducts.com with a photo of the damage and your order number. We will send a replacement immediately, no questions asked. Every organizer is inspected before it ships but occasionally something happens in transit, that is on us, not you.
Free shipping is available on orders over $75 within the United States.
No. PLA softens at around 55-60°C and dishwashers exceed that temperature. Running it through a dishwasher will warp the body, inserts, or both. Hand wash only with mild soap and lukewarm water. It dries quickly and cleans easily, use a soft cloth or cotton swab to get into the insert compartments.
When brand new, the lid can feel slightly firm on the first few open and close cycles. This is normal, most customers find it feels perfectly smooth after a day or two of regular use.
If it still feels stiff after a week of use, contact us and we will sort it out.
Nothing is wrong. What you are seeing are layer lines, a characteristic of 3D printing that gives each piece a subtle texture. They are completely normal and do not affect the function, strength, or durability of the organizer in any way.
They are only visible on close inspection. During normal use you will not notice them. We consider it part of the handcrafted quality of a made-to-order product versus a mass-produced one.
Twist the lid off and slide the inserts out. The inserts and the body can all be rinsed with lukewarm water and mild soap separately. A soft toothbrush or cotton swab works well for the individual compartments. Make sure everything is fully dry before reassembling and loading pills. Do not use hot water and do not put any part in the dishwasher.
Our Products
